Tips & Tricks:

The Free garden shears included in the Landscape Design Kit are all you need to cut and shape The Edge™

Cutting & Shaping:

Cutting instructions for Inside Curves:

                           Spacing required for a large radius.

   For smaller curves.                                5” Radius shown

            For really small curves.                       As small as a 3’’ Radius!

Cutting instructions for Outside Curves:

                 Straight cuts are all that's required for outside curves.

                    As small as a 1 1/2" Radius!

Square Corners:

 Inside Corners: Cut the Edge at 45 deg. & connect using the corner clips.

Joining Lengths:

When connecting 2 lengths use the straight clips, (which can also be bent to any angle).

"Long straight runs are a snap with the Edge"

Anchoring:

It’s usually not necessary to anchor The Edge in place, but if you choose to do so, 14d or 16d nails going through the small holes will work fine.  

Weed control:

To reduce weed growth around your edging, try adding a narrow strip of a weed barrier fabric before back filling. 

The fabric can be tucked underneath the Edge and held in place with nails going through the small holes.

Caution: When using a weed barrier fabric, be careful not to slide the fabric too far underneath the edging.  (You don’t want it to interfere with the grass roots). 

ORDER TODAY